FRM220-E1-T1-ST015 - Single E1 and T1 to Single-Mode Fiber Extender (Media Converter), 15Km Range, 1310nm, ST connectors, standalone Unit with AC Adapter, Optional Web Management

The FRM220-E1-T1-ST015 is a single-mode 1310nm, 15Km range, dual fiber, E1 or T1 extender. A simple DIP switch sets unit for operation on E1 120Ohms or T1 100Ohms twisted pair copper interfaces. The FRM220-E1-T1-ST015 can extend transparently over fiber any E1/T1 PRI, framed or unframed format signal. Unit supports local console, web-based and in-band management including powerful features like Dying Gasp, Remote-Monitoring-Status and Loop-Back-Test. Web and In-band features are available when unit is inserted into the FRM220 in-band managed fiber chassis.

• Standards: E1 and T1: ITU-T G.703, G.704, AT&T TR-62411, ANSI T1.403, Interfaces: RJ48c 100ohm balanced T1 connector or RJ48c 120ohm balanced E1 (software or DIP switch selectable) and dual ST 155M fiber port
• Operating wavelength: 1310nm singlemode, Operating distance: 15Km on 9/125um fiber, power budget 17dB, Optical connector: ST dual type
• Front LEDs: Power, Fiber Link, E1/T1 Link, Test mode, Sync, RD, TD, AIS
• Power: External 90-260V AC switching adapter 12VDC@1A with NEMA1-15(2 blades only), US type main plug - included in the box
• Temperature: 0 — 50°C (Operating); 0 — 70°C (Storage), Humidity: 20 — 80% non condensing (Operating); 0 — 90% (Storage), Consumption: less than 4W, Dimensions(WxDxH): 85.6mm x 122.6mm x 20mm, Weight: 340g (without AC adapter), Compliance: CE, FCC Class A, MTBF: 65,000 hours