MG Chemicals 832C Translucent Epoxy Encapsulating & Potting Compound for Electronics, 450 mL Dual Cartridge (Ratio 2: 1)

The 832C Translucent Epoxy Encapsulating and Potting Compound is an electric grade epoxy. It is simple to mix and easy to use. This two parts clear epoxy provides great insulation and protection value. It protects against static discharges, shocks, vibrations, and mechanical impacts. It insulates against heat and conductivity. It is extremely resistant to environmental humidity, salt water, and many harsh chemicals. This product is offered in a 450 mL dual cartridge for use with a dispensing gun and static mixing tips. Dispensing Gun 8DG-450-1-1 sold separately. Additional static mixers 8MT-450 for sold separately. Applications & Usages The 832C epoxy is used to pot or encapsulate printed circuit assemblies in protective blocks. The cured epoxy improves reliability, operational range, and lengthens the life of electrical and electronic parts. Its primary applications are in the automobile, marine, aerospace, aviation, communication, instrumentation, and industrial control equipment. Storage: Store between 16 and 27 °C [60 and 80 °F] in dry area away from sunlight. Prolonged storage or storage at or near freezing temperatures can result in crystallization. If crystallization occurs, reconstitute the component to its original state by temporarily warming it to 50 to60 °C [122 to 140 °F]. To ensure full homogeneity, stir thoroughly the warm component, rein corpora ting all settled material. Re-secure container lid and let cool down before use.

• Extreme impact resistance (contains a form of nylon)
• 450 mL dual cartridge for use with a dispensing gun and static mixing tips
• Affords high security, once cured, extremely difficult to remove
• Non-conductive, an electrical insulator
• 8MT-450 Static Mixer included. 8DG-450-2-1 Dispensing Gun sold separately